High‐performance liquid chromatographic column packings with different particle sizes: Chromatographic behavior for the quality analysis of HuanglianShangqing pill

The chromatographic separation of traditional Chinese medicines is still a highly challenging task in analytical science with respect to its hundreds and thousands of chemical compounds, while increase of separation efficiency can greatly improve the separation power of chromatographic column for traditional Chinese medicine. In this study, 13 bioactive components in HuanglianShangqing pill were selected as an index to optimize the separation conditions and evaluate the system suitability of three commercially available columns packed with 1.8, 3.5, and 5.0 μm particles. The chromatographic separations were obtained by the most appropriate Eclipse Plus C₁₈ column (100 × 2.1 mm, 3.5 μm) within 45 min using gradient elution with aqueous‐ammonium acetate (10 mmol/L, pH 5.0) and acetonitrile, at a flow rate of 0.3 mL/min and an operating temperature of 30°C. The quality of HuanglianShangqing pill was assessed through combining simultaneous quantification of 13 compounds with fingerprint analysis. For the qualitative analysis, mass spectrometry was used to confirm the 13 compounds. All the validation data conformed to the acceptable requirements. For the fingerprint analysis, 32 peaks were selected as the common peaks at 254 nm to evaluate the similarities among HuanglianShangqing pills obtained from ten manufacturers.     

Overloading control of gas chromatographic systems

Increasing the interlaboratory reproducibility of gas chromatographic retention indices requires avoiding measurements distorted by overloading effects. Several criteria of evaluating the limits of the mass overloading of gas chromatographic systems are compared and reconsidered. The criteria mostly appropriate for practical purposes are based on (i) the dependences of factors of peak broadening (ratio of peak height and its width) vs. amount of analyte injected into the chromatographic column and (ii) the dependence of parameters characterizing the peak distortion (asymmetry factor) vs. the amount of analyte. Both these criteria provide mutually comparable evaluations of the overloading limits for analytes of different polarity. At the same time, the dependence of retention indices vs. amounts of analyte injected in the chromatographic column cannot be recommended for overloading control, because the parameters of the corresponding linear regressions indicate temperature dependence. The interpretation of certain gas chromatographic anomalies requires the correct evaluation of overloading limits. For example, the unusual temperature dependence of retention indices of polar analytes on non‐polar stationary phases and the dependence of retention indices on ratio of amounts of target analytes and reference compounds.     

Development of a method using high‐performance liquid chromatographic fingerprint and multi‐ingredients quantitative analysis for the quality control of Yangxinshi Pian

A simple and reliable method of high‐performance liquid chromatography with diode array detection method was developed for fingerprint analysis and simultaneous determination of six compounds including puerarin, salvianolic acid B, berberine hydrochloride, palmatine chloride, dehydrocorydaline, and icariin in the Chinese medicine preparation Yangxinshi Pian. The separation was performed on an Agilent Eclipse XDB‐C₁₈ reserved‐phase column (250 mm × 4.6mm I.D., 5 μm) using gradient elution with 50 mmol/L monopotassium phosphate aqueous solution and methanol as mobile phase at a flow rate of 1.0 mL/min. The column operating temperature was set at 30°C, and the detection wavelength was 280 nm. The method was validated by linearity, precision, accuracy, stability, and recovery. For fingerprint analysis, 25 peaks were selected as the common peaks, and four kinds of similarities including cosine similarity (S), ratio of similarity (S′), projection content similarity (C), and content similarity (P) were applied to evaluate the quality consistency of different batches of Yangxinshi Pian. The results showed that the developed method was an efficient tool for quality evaluation of Yangxinshi Pian.     

Individual and interactive effect of ultrasound pre-treatment on drying kinetics and biochemical qualities of food: A critical review

One of the earliest and most prevalent processing methods to increase the shelf-life of foods is drying. In recent years, there has been an increased demand to improve product quality while lowering processing times, expenses, and energy usage in the drying process. Pre-treatments are therefore effectively used before drying to enhance heat and mass transfer, increase drying efficiency, and lessen degradation of final product quality. When food is dried, changes are expected in its taste, color, texture, and physical, chemical, and microbial properties. This has led to the need for research and development into the creation of new and effective pre-treatment technologies including high-pressure processing, pulsed electric field, ultraviolet irradiation, and ultrasound. Sound waves that have a frequency >20 kHz, which is above the upper limit of the audible frequency range, are referred to as “ultrasound”. Ultrasonication (US) is a non-thermal technology, that has mechanical, cavitational, and sponge effects on food materials. Ultrasound pre-treatment enhances the drying characteristics by producing microchannels in the food tissue, facilitating internal moisture diffusion in the finished product, and lowering the barrier to water migration. The goal of ultrasound pre-treatment is to save processing time, conserve energy, and enhance the quality, safety, and shelf-life of food products. This study presents a comprehensive overview of the fundamentals of ultrasound, its mechanism, and how the individual effects of ultrasonic pre-treatment and the interactive effects of ultrasound-assisted technologies affect the drying kinetics, bioactive components, color, textural, and sensory qualities of food. The difficulties that can arise when using ultrasound technology as a drying pretreatment approach, such as inadequate management of heat, the employment of ultrasound at a limited frequency, and the generation of free radicals, have also been explained.     

An ultra-wideband coding polarizer for beam control and RCS reduction

Pancharatnam−Berry (PB) phase metasurface, as a special class of gradient metasurfaces, has been paid much attention owing to the robust performance for phase control of circularly polarized waves. Herein, we present an element-based polarizer for the first step, which enables the incident electromagnetic waves into the cross-polarized waves with the relative bandwidth of 71%, and the polarization conversion ratio exceeds 90% at 6.9−14.5 GHz. Then an eight-elements coding polarizer based on the PB phase is presented for the applications on beam control and radar cross section reduction. The simulated values indicate that the reduction of radar cross section is more than 10 dB at 6−16 GHz. Our work reveals the availability of manipulating the waves, beamforming in communication systems and electromagnetic stealth, and so on.     

显化反应条件视角 发展反应调控意识——受控的燃烧

以波义耳研究燃烧的史实为背景,创新设计燃烧条件的探究实验,并提出“条件叠加式”燃烧条件探究新思路。以“燃灭控”为主线,一以贯之地显性化“条件是认识化学反应的一种基本视角”,落实“在一定条件下通过化学反应可以实现物质转化”的化学观念。基于调控化学反应思想创新设计“燃旺弱灭”反应控制视域,统整开展“情境”“活动”与“任务”三位一体的学习活动。重置教材实验的教学价值取向,结合燃烧的形式美、汉语言文字解读,将化学学科知识与美育、汉语言文化领域跨领域融合。     

基于毕业学生的信息追踪与反馈机制提高教学管理效率与人才培养质量

学生是教育的受体,学生的意见在推进课程建设、教学改革以及提升人才培养质量等方面具有重要的指导和借鉴意义。秉承立德树人的理念,以服务学生成长发展为核心,育人成果为导向,探讨做好教育的实施主体和接受主体之间互相反馈的机制和模式,对不断推动教学改革向高效率和高质量方向发展具有重要意义。着重探讨了化学学院做好毕业生信息追踪的具体路径和意见反馈模式。     

洗涤用品质量安全检测技术研究进展

洗涤用品是日常使用的产品,其质量安全受到广大消费者的关注。洗涤用品中可能存在的化学风险物质,将对消费者的健康安全产生负面影响。为了减少和避免洗涤用品质量安全问题,研究人员采用多种分析测试技术,开发、建立了洗涤用品中化学风险物质的检测方法。该文综述了近年来洗涤用品质量安全检测技术的研究进展,以期为相关领域的科技人员提供理论支持和技术参考。     

二维纳米材料的改性及其环境污染物治理方面的应用

二维纳米材料是一类具有类似二维平面形态,且厚度在纳米级甚至数个原子层的材料,其种类繁多并且具有很多与体相材料不同的物化性质,在众多领域受到了广泛关注。二维纳米材料在催化降解、吸脱附、过滤、传感检测等领域具有可观的应用潜力,还可用于环境污染的防治。通过形貌、元素、基团、缺陷的修饰、改性和材料合成等策略可以调控二维纳米材料的性质,从而研发新的材料体系或者改善二维纳米材料的性能。本文首先归纳了二维纳米材料的种类,并重点阐述了各种改性策略的作用及研究现状,以及改性的二维纳米材料在治理水体污染、大气污染和污染物检测等方面的应用,为二维纳米材料在环境治理领域的发展现状作了系统介绍和展望。